From £450.00
Core Domestic Meter Installation & Commissioning (Limited Scope) (CMA2LS/MET3LS)
Course overview
Course to install and commission domestic gas sized meters which are then sealed off at the meter outlet fitting, ensuring gas is not left available to installation pipework. This includes medium pressure meters not greater than 2 bar pressure.
This course combines CMA2 LS, which covers gas safety in limited scope domestic gas work, and MET3 LS, designed to test the competence of an installer wishing to install and commission domestic gas meters that are sealed off at the meter outlet fitting. CMA2 LS is a pre-requisite to MET3 LS.
Code
CMA2LS/MET3LS
Duration
5 day course
Benefits for the learner
This course teaches installers everything they need to be able to install and commission primary domestic gas meters, up to six cubic meters per hour capacity, that are sealed off at the meter outlet fitting. Training and assessment covers general gas safety competence in limited scope core domestic gas work (CMA2 LS)* and the specific gas meter appliance module, MET3 LS.
MET3 LS covers the installation and commissioning of domestic gas meters, but only when they are sealed off at the meter outlet fitting, with no gas is left in the installation pipework and/or appliances.
*CMA2 LS does not cover work on altering the position of meters, meter exchange, connection of outlet pipework or commissioning on appliances or internal installation pipework other than that required for the meter installation.
Benefits for the employer
Compliance with HSE requirements by employees achieving ACS qualifications allowing Gas Safe Registration.
What you’ll learn on this course
- Gas Safety (Installation & Use) Regulations 1998.
- Tightness testing and purging.
- Gas industry unsafe situations procedure.
- Scope of operatives work checking and setting regulators.
- Operation and positioning of emergency isolation and warning labels.
- Emergency procedures.
- Pipe-work and fittings installations.
What do I need to bring with Me?
- Proof of ID.
- NCO Service Laying Certificate or EUSR card.
- Two passport photos.
- PPE and any preferred tools.
All reference materials will be provided.
How is the training delivered?
The training is delivered over 3 days by a combination of theoretical and practical sessions. The multiple choice questionnaires (both open and closed book) are then taken on day 4 and candidates are issued with job packs to take away with them.
Candidates must then gain onsite experience with a Gas Safe Registered Engineer in installing domestic gas meters to a capped meter outlet. This must be evidenced using job pack templates and signed off by their mentor onsite.
Once complete the candidate will then come back into centre to complete their Practical Observations and Practical Assessment Workbook Scenarios over 1 day.
Qualifications available
Upon successful completion learners will be issued with an NICEIC accredited qualification in CMA2 LS & MET3 LS. Gas Safe Register will be notified of all certification results by NICEIC allowing the individual or employer to apply for Gas Safe Registration.
October 2022 - Duane Clark
Steve's been brilliant really good trainer and simplified some of the content so I could understand