Gas networks utility training courses

Utility SHEA - Gas (SHEA-G)

1 day course for an understanding of health, safety and environmental awareness and regulations within the gas industry (EUSR card).

DSEAR - Hazardous Area Classification - Gas Metering (DSEAR(V))

2 day course to successfully complete hazardous area classifications of gas metering equipment referencing IGEM/GM/7A and IGEM/GM/7B.

Manual Handling for Operational Staff (MHO)

½ day course for manual handling, including lifting, carrying, pushing and pulling. Providing the confidence and knowledge to move an object safely.

Abrasive Wheels - Grinders & Cut Off Saws (AWGC)

1 day course for specification and mounting of abrasive wheels on portable equipment. Including safe operating for cutting and grinding wheels.

Gas Distribution Appreciation (GDA)

1 day course for operatives, team leaders and managers, to develop their knowledge and understanding of gas network distribution operations up to 7bar.

Gas Distribution for Managers (GDM)

5 day course for utilities managers to plan and manage service and main laying in Network Construction Operations.

Network Construction Operations Gas Level 1 (NCO1G)

10 day course for skills to assist with gas mains and service laying of polyethylene (PE) pipe.

Network Construction Operations Gas Fundamental Health & Safety (NCOG-FH&S)

2 day course for those who are looking to enrol onto a Level 2 Gas NCO programme but don't already hold their NCO1 qualification.

Network Construction Operations Gas Level 2 Induction (NCO2G-IND)

3 day course for those who install gas services or mains and are to undertake their Level 2 NCO Gas - Service Layer or Main Layer.

Network Construction Operations Gas Level 2 Service Laying (NCO2GSL)

4½ day course for operatives and supervisors who install gas services, to achieve Level 2 Certificate in NCO (Gas) - Service Layer.

Network Construction Operations Gas Level 2 Main Laying up to 180mm (NCO2GML)

4½ day course for operatives and supervisors who lay gas mains and are required to gain Level 2 Diploma in NCO (Gas) - Main laying.

Network Construction Operations Gas Level 2 Escape, Locate and Repair (NCO2G-ELR)

5 day course for operatives and supervisors who may be required to undertake emergency and remedial work on the UK gas networks.

NCO Level 2 Main Laying Upskill Gas 180mm - 355mm (MLUG)

1 day course for operatives and supervisors, for certification and accreditation to install gas mains pipe diameter 180mm - 355mm.

NCO Level 2 Main Laying Upskill Gas Above 355mm (MLUG2)

1 day course for operatives and supervisors, for certification and accreditation to install gas mains pipe diameter above 355mm.

Network Construction Operations Gas Level 2 Portfolio Build Day (NCO2G-PB)

For those completing their NCO Gas Level 2 service laying or main laying qualifications but need assistance and support finalising their ePortfolio.

Impact Moling/Thrustboring (IMT)

1 day course for understanding of impact moling operations and trenchless technology. Benefits those involved in excavation works.

Multi Utility Electrofusion Jointing up to 355mm (MUEF)

1 day course for service and main layers to undertake joining Polyethylene pipe safely with electro fusion welding of PE pipe up to 355mm.

Multi Utility Butt Fusion Jointing up to 355mm (MUBF)

1 day course for main layers to undertake joining of Polyethylene pipe safely using butt fusion welding of PE pipes up to 355mm.

Multi Utility Large Diameter Fusion Jointing above 400mm (MULDF)

2 day course for main layers in Polyethylene distribution to undertake fusion welding of PE pipes above 400mm diameter.

Utility Excavation (Category 1) Locate Utility Services - HSG47 (UE1)

1 day course for operatives who will be required to identify, detect and mark utility services prior to excavating.

Utility Excavation (Category 2) Implement Safe (Digging) Excavating Practices (UE2)

1 day course for operatives required to safely excavate and maintain holes and trenches using hand tools and hand-held power.

Utility Excavations - Categories 3-5 - Timber, Steel and Proprietary Support Systems (UE3-5)

3 day course for operatives expected to carry out the associated tasks related to timber, steel and proprietary support systems.

Utility Excavations Refresher - including categories 3-5 - Timber, Steel and Proprietary Support Systems (UER)

2 day course for experienced and qualified operative to refresh skills related to timber, steel and proprietary support systems.

Gas Network Design Foundation (GIRS1)

5 day course for the skills to develop low pressure gas mains, extensions and services for housing and industrial developments.

Gas Network Design Complex (GIRS2)

An Energy & Utility Skills Endorsed Vocational Development Programme for the design of gas networks to Lloyds Registers Gas Industry Guidance Document GIG2.

SCO Module 1: Core and Module 2: Permit to Work (PtW) (SCO1&2)

1 day course for work under the SCO perimetry scheme on Gas operational sites to deliver information associated with the use of a Permit to Work.

SCO Module 1: Core and Module 2: Permit to Work (PtW) - Renewal (SCO1&2-R)

½ day course providing refresher training for persons with current SCO 1&2 or SCO Core & module 2 (PTW) associated with the use of a Permit to Work.

SCO Module 1: Core and Module 5: Form of Authority (FoA) (SCO5)

1 day course for work under the SCO perimetry scheme on Gas operational sites to deliver information associated with use of a Form of Authority.

SCO Module 5: Form of Authority (FoA) - Renewal (SCO5-R)

½ day course providing refresher training for work under the SCO perimetry scheme on Gas operational sites associated with use of Form of Authority.

SCO Module 3: Non-Routine Operation (NRO) (SCO3)

1½ day course to deliver information associated with the use of a Non-Routine Operation (NRO), to demonstrate appropriate knowledge & understanding.

SCO Module 3: Non-Routine Operation (NRO) - Renewal (SCO3-R)

½ day course providing refresher training for those with a current SCO 3 involved in operational works on Gas Networks and Meter Installations.

SCO Module 4: Routine Operation (RO) (SCO4)

1 day course to deliver information associated with the use of a Routine Operation (RO), to demonstrate appropriate knowledge & understanding.

SCO Module 4: Routine Operation (RO) - Renewal (SCO4-R)

½ day course providing refresher training related to the use of a Routine Operation (RO), to demonstrate appropriate knowledge & understanding.

Gas Network Instrumentation Modules (GNIMs)

Training to provide an overview of the aspects of the instrumentation that is typical on Gas Networks. Gain an awareness of operational equipment.

Gas Network Electrical Modules 2, 3 & 4 - Electrical Authorisation

Electrical authorisation training related to Gas Networks within the UK. Courses to meet the requirements for working on or near electrical equipment.

Gas Network Electrical Modules 2, 3 & 4 - Electrical Authorisation (Blended)

Blended learning training for courses related to Gas Networks within the UK. Meeting the requirements for working on or near electrical equipment.

Gas Network Electrical Module - Portal Appliance Testing (GNEM5)

PAT testing refresher training for service and inspection of portable electrical equipment. Provides awareness of changes in the 5th edition COP.

Gas Network Electrical Module - Portal Appliance Testing (GNEM5) (Blended)

Blended learning refresher training for service and inspection of portable electrical equipment. Provides awareness of changes in the 5th edition COP.