1. Home
  2. Training
  3. Estates & Facilities Management
  4. Healthcare Estates & Facilities

Develop offer a wide range of Healthcare & NHS estates and facilities management training solutions that are all designed and delivered to specifically meet the requirements of the Health Technical Memorandums (HTM) including HTM 06-02 and 06-03. Our experienced teams can also provide consultancy and create bespoke programmes aligned to business procedures and/or specific business requirements.

We offer our Estates & FM training out of our UK-wide training centres, including those in Manchester, York, Swindon, Derby, Brentwood, Norwich, Birmingham and Linlithgow, Scotland. However, our Huby-based centre on the outskirts of York is our centre of excellence for electrical and mechanical training. In mid-2023 it underwent a £1m refurbishment and also had a fully to-scale training street built, known as Training Terrace.

...
Competent Person: Low Voltage Healthcare (CP1)

Healthcare competent persons training course for safety and duties on electrical low voltage installations (HTM 06-02).

Find out more
...
Authorised Person: Low Voltage Healthcare (AP5)

Healthcare training course for authorised persons for low voltage installations. Benefits hospital engineers in supervision of electrical services.

Find out more
...
Authorised Person: Low Voltage Healthcare Refresher (AP5a)

Healthcare low voltage refresher training course for safe working of hospital engineers and technicians in supervision of electrical services.

Find out more
...
HV Workshop - Practical Introduction to Safe Isolation of HV Equipment (ME31)

HV safety training course for an introductory workshop into safe working on high voltage power distribution systems and issuing of safety documents.

Find out more
...
Authorised Person: High Voltage (Healthcare) (AP6)

High voltage training course for authorised persons for operation and maintenance of healthcare HV equipment. HTM 06-03 safety rules.

Find out more
...
Authorised Person: High Voltage (Healthcare) Refresher (AP7)

High voltage training course for healthcare authorised persons to refresh requirements of safe working procedures. HTM 06-03 safety rules.

Find out more
...
High Voltage Distribution Systems Design and Grading (ME3)

Electrical engineers training course for the design and grading of high voltage distribution systems (up to 33kv).

Find out more
...
Authorising Engineer (MS1)

Authorising engineer training course designed to equip prospective engineers to undertake their duties. Benefits MOD infrastructure engineers.

Find out more
...
Electrical Introduction for Mechanical Technicians (ME12)

Conversion training course for those with mechanical background who need an understanding of electrical low voltage installations.

Find out more
Virtual classroom
...
Electrical Awareness (ME29(V))

Virtual training course for an introduction to requirements for safe use of electrical equipment in the workplace as required by regulations and safe practices.

Find out more
Digital training
...
Electrical Awareness (ME29(D))

Digital training course for an introduction to requirements for safe use of electrical equipment in the workplace as required by regulations and safe practices.

Find out more
Virtual classroom available
...
HV Awareness for Managers (ME30)

High voltage awareness training course for facilities managers with responsibilities for HV systems and electrical safety regulations.

Find out more
...
18th Edition Wiring Regulations (BS7671:2022) (EL18)

City & Guilds accredited training course for electricians, technicians and installers to display knowledge of the IET Wiring Regulations 18th Edition.

Find out more
Virtual classroom available
...
Electricity at Work Regulations (ME33)

Maintenance training course for Electrical Duty Holder's to have a greater understanding of the requirements of the Electricity at Work Regulations.

Find out more
Digital training
...
Electricity at Work Regulations (ME33(D))

Digital training course for an introduction to a greater understanding of the requirements of the Electricity at Work Regulations and how it affects your work.

Find out more
...
Fundamental Inspection, Testing and Initial Verification (ME27)

Electrical verification training course for undertaking inspections on domestic single phase system circuits and installations.

Find out more
...
Inspection, Testing and Certification of Electrical Installations (ME91c)

Installations training course to prepare candidates for the inspection and testing of electrical installation work.

Find out more
...
In-service Inspection and Testing of Electrical Equipment (PAT Testing) C&G 2377-77 (ME16(P))

Electrical low voltage training course for inspection of portable appliance testing (PAT). Compliance with statutory legislation.

Find out more
...
Single Point Safe Isolation (ME15)

Electrical safety training course for those with Mechanical/ Maintenance background who need to carry out their own single point electrical isolation.

Find out more
...
F-Gas Cat 1 (City & Guilds 2079-11) (ME9)

F-Gas course for compliance and maintenance of refrigeration and heat-pump equipment containing fluorinated gases. Certified under the LCL awards scheme.

Find out more
Virtual classroom available
...
Legionella and ACOP L8 Awareness (WS11)

One-day, entry level legionella awareness course. Ideal for those new to the industry or have an involvement like tap temperature monitoring or flushing duties.

Find out more
Revised in 2022
...
Thermostatic Mixing Valves (WS13)

One day revised course for persons for install/commission/perform in-service testing of thermostatic mixing valves in healthcare/commercial/domestic settings.

Find out more
...
Installation, Commissioning and Compliance Testing of Type BA Devices (RPZ Valves) (RPZ)

Type BA verifiable reduced pressure zone training course for the testing of valve assemblies (RPZ backflow prevention devices).

Find out more
...
Water Supply (Water Fittings) Regulations (WREG)

Two-day course for contractors/building services personnel seeking to ensure compliance with Water Supply (Fittings) Regulations 1999/Water Regulations Guide.

Find out more
...
WREG Experienced / Renewals (WREG - Exp)

One-day course for contractors/building services personnel seeking to ensure compliance with Water Supply (Fittings) Regulations 1999/Water Regulations Guide.

Find out more
...
Water Hygiene/Competent Person (Healthcare) (WS4)

Two-day course designed for hospital estates staff, housekeeping, contractors or any personnel working on water distribution system or cleaning water outlets.

Find out more
Estates & FM Training Brochure
Course Planner

NHS Healthcare training for Estates Managers & Teams

The NHS has a huge property portfolio, making estates and facilities managers a very important part of the management team. Healthcare Estates and/or Facilities Managers are responsible for the infrastructure that health services rely on.

Their job may involve planning and commissioning new buildings and facilities, redeveloping existing premises, or the disposal or demolition of redundant resources. This includes both the buildings themselves and the systems that keep them running such as heating and lighting.

To help Estates and Facilities Managers with their health, safety and environmental training, Develop Training offers relevant courses.

Safe Systems of Work for low and high voltage electrical systems

Develop Training offers a range of electrical and mechanical training courses for those working in an NHS / healthcare setting.

Our courses cover the safe systems of work and safety procedures for operation and management of low voltage and high voltage electrical installations in healthcase premises.

Our courses cover roles including:

  • Competent Person (Low Voltage)
  • Authorising Engineer
  • Authorised Person (Low Voltage)
  • Authorised Person (High Voltage)
  • Electrical Engineer
  • Maintenance Engineer
  • Designated Person
  • Duty Holder
  • Accompanying Safety Person

Our courses cover the following Health Technical Memorandum’s (HTM’s):

  • HTM-03 Heating and Ventilation Systems
  • HTM-04 Water Systems
  • HTM-06 Electrical Services

 

Competent Person Electrical Low Voltage HTM 06-02

Our City & Guilds Accredited Competent Person: Low Voltage training course specifically designed for those working in an NHS / healthcare environment will enable you to gain the knowledge required to carry out the role of Electrical Competent Person. The training meets the criteria contained in Appendix 7 of HTM 06-02.

This training is aimed at electricians, maintenance staff and engineers who have been nominated as a Competent Person (Electrical) in accordance with HTM 06-02: Electrical Safety Guidance for Low Voltage Systems. By the end of the course the individual will be able to;

  • Demonstrate safe methods of work in accordance with HTM 06-02
  • Identify the need for inspection and testing of completed electrical work
  • Safely test electrical installations
  • State the key roles and duties of the Competent Person (LV) as specified in HTM 06-02

What is HTM 06-02?

Health Technical Memorandum 06-02 (HTM 06-02) is an NHS guidance document and safety guidance handbook designed to provide information and statutory guidance for those responsible for meeting the requirements of the Electricity at Work Regulations 1989. Further information can be found here.

Bespoke courses

Do you need bespoke training that’s tailored to your organisation’s needs and requirements?

Simply get in touch with our Customer Service Team on 0800 876 6708 or email customerservice@developtraining.co.uk and get the ball rolling today.

Professional accreditations